Laser light source generator is the whole system

when the two mirrors is proportional to the speed and at a certain shift combinations to achieve a dynamic beam synthesis of space, has been receiving a stable image on the screen. If you change the two motor armature voltage applied on the size and positive and negative polarity, that is reversible motor speed, or manually adjust the mirror that is attached to the motor shell seat fine-tuning knob to change the inclination of two mirrors, you can get, such as rose clover lines and a series of shapes, rich geometry to. The light weight of laser pointer  will attract more customers. Laser light source generator is the whole system, the laser display environment, the body and screen configurations required to achieve the effect of different colors, different power lasers. General indoor display, screen body closer with the launch point, the lower power requirements, and because the human eye is more sensitive to red light, red laser under the same conditions selected generator power generators than other color laser power is low. Lasers used for display, the light intensity of 800-1200 lumens, has been able to meet the requirements of most people, so the display system of the laser power in the tens of mW ① ~ 20W. The approval of laser pointer has been got.
The laser uses a wavelength of 0.63um semiconductor lasers, because of its wavelength and 0.6328um similar, and therefore can replace the He-Ne laser produces red light, a small firm, difficult to damage, to make up for the lack of He-Ne laser. Optical display system console to control the laser optical path portion, including the optical system and control system. Optical system of the laser beam optical switching, scanning the laser beam produces a variety of effects. Control system for optical displacement of the optics system, turning the drive control. Unit in the optical light path of the front console, the drive motor and the mirror, single-chip control of the motor rotation control signal to drive the mirror to the incident laser beam to the screen to form a pattern. Optical scanning signal from the graphics file. By general image processing software to produce graphics to display graphics contour lines, contour lines in the production of contour to the attention of the closed and compact. The approval of laser pointer  has been finished.