The optional function ofgreen laser pointer is very convenient for the customer

The optional function ofgreen laser pointer is very convenient for the customer
Laser welding than the smaller power of the laser beam cutting metal, the material to melt without it gasification become a continuous solid structure after cooling. Laser application in the industrial field is the limitations and shortcomings, such as using a laser to cut the food and plywood are not successful, the food is cut at the same time also be burning, cutting plywood economic uneconomical. Laser drilling technology has high accuracy, versatility, high efficiency, low cost and integrated technology with significant economic benefits, etc., has become one of the key technologies of the modern manufacturing. green laser pointer  can benefit the customer in every way.
Before the advent of the laser, only larger hardness of the material in the material of hardness less punch. So that the maximum hardness of diamond drilling, has become extremely difficult. The emergence of the laser, this type of operation is fast and safe. However, the laser drilled hole is conical, rather than mechanical drilling cylindrical, in some places is very convenient. Laser marking technology is one of the largest areas of application of laser processing. The laser marking is the use of high energy density laser local irradiation of the workpiece surface material vaporized or color change in the chemical reaction, thus leaving a permanent mark a marking method. Laser marking can play a variety of text, symbols and patterns, the character size from millimeters to micrometers. The optional function ofgreen laser pointer is very convenient for the customer.
The security of the product has a special meaning. Excimer laser marking is a new technology developed in recent years, especially suitable for marking metal, can achieve sub-micron marking has been widely used in the microelectronics industry and biological engineering. Laser to re-balance technology with a laser to remove the overweight part of the imbalance on the high-speed rotating parts, so that the axis of inertia coincide with the axis of rotation in order to achieve the balancing process. Laser re-balancing technology to measure and de-emphasis of the two functions can be performed simultaneously to the measurement and correction of the imbalance, the efficiency is greatly improved, there are broad prospects for application of gyro manufacturing.